banner

 

General Dynamics SATCOM Technologies will display a wide variety of SATCOM terminals, control systems and electronic products, in stand # 1.A41 during IBC 2018 September 14-18 at the RAI in Amsterdam.

SATCOM Terminals

New! Fortress® Wireless and SATCOM Deployable Kit
New at IBC this year is a display of the Fortress Wireless and SATCOM Deployable Kit.

The combination of the Fortress Quad-band LTE eNodeB (RN2402) with the SATCOM Technologies ManPak T® antenna provides spectrum agility for an 'All-in-One' last mile remote wireless communications solution.

The lightweight, but durable kit is ideal for remote areas with limited backhaul accessibility where terrestrial communications do not exist. The kit provides or extends last mile wireless coverage up to 10km, enabling broadband connectivity for user equipment including smartphones and sensors. The rugged, lightweight kit is easy to transport, use and set up and can be quickly deployed anywhere in the world including harsh outdoor environments. The kit is available in multiple configurations and can be customized to fit a wide variety of applications.

Click here to download a complete data sheet on the Fortress Wireless and SATCOM Kit.

Model C140M Mobile Ku-Band Antenna
General Dynamics' small terminal SATCOM display will also include an exhibit featuring the Model C140M Mobile Ku-Band Antenna.

The lightweight 1.40-meter mobile antenna is a compact design for worldwide transmit and receive operation up to Ka-band. This transportable antenna consists of a single-piece carbon fiber composite reflector mounted on a cable drive elevation-over-azimuth positioner. This results in a low-weight antenna with superior stiffness and high performance under wind loading conditions.

The state-of-the-art design provides exceptionally low sidelobe and cross-polarization performance, well within INTELSAT and EUTELSAT requirements.

The complete antenna system can be interfaced with most lightweight vehicle structures for the purpose of mobile SNG applications.

Download a complete datasheet on the C140M Antenna.

On-The-Move®
General Dynamics' SATCOM On-the-Move (SOTM) product line provides proven, high data rate, reliable Ku, Ka-Mil, Ka-Com and X-Band satellite communications while on-the-move in a variety of aperture sizes. Leveraging a combination of integral tracking receiver, gryo stabilization and inertial measurement unit, SOTM terminals provide vital access to voice, video and data in areas where terrestrial communication systems have been damaged, overwhelmed or simply don't exist. And while these terminals are sensitive enough to accurately receive satellite communications while on-the-move, they are also rugged enough to perform in the most challenging environments.

All General Dynamics SOTM products share a legacy of proven, reliable performance on hundreds of aircraft, ships, fast boats and a variety of military wheeled and tracked vehicles, including HMMWV, Bradley and Stryker and a variety of commercial vehicles.

General Dynamics' SATCOM Technologies Fourth Generation design architecture included in the newest Model 20 series (M20-M24) builds upon the Company's best-in-class features including gyro stabilization, point and track operational modes, interchangeable RF payloads, direct-drive antenna motors, and a simple L-Band interface which is modem agnostic. In addition, the Gen IV improvements include increased MTBF, reduced weight and an improved air-to-air heat exchanger that can be used for both ground and maritime applications with no further modifications.

Click here to download full data sheets on SATCOM Technologies' SOTM products.

Model Display 9.2M Medium Fixed Antenna

9.2 Meter KXKA Antenna
Combining high performance and quality components, SATCOM Technologies' new 9.2-Meter KX Antenna delivers the best qualities of Ka-Band antenna capability mounted on its cost effective and durable kingpost pedestal. The 9.2-Meter KX Antenna is an antenna/pedestal combination that delivers world-class Ka-Band transmit and receive performance with superior and reliable antenna control.

  • Cassegrain 4-Port Tx/Rx Circular feed with optional TE21 tracking coupler (monopulse)
  • High precision Ka-Band Panels
  • Steel back-up structure painted white, closed for anti-icing option
  • Large working platform with access via stairway / handrails and electric hoist to ground
  • Large 9 ft hub with roll-up, lockable hub access door

Click here to download a complete data sheet on the 9.2M KXKA Antenna.

Control Systems
This year at IBC, SATCOM Technologies is coordinating a display of a range of control systems from very economical models to full-featured monopulse units.

Model 830A Antenna Control System

Economical Satellite Tracking
The Model 830A Antenna Control System provides precision satellite acquisition and tracking with most mobile, transportable, fixed and flyaway antennas. The Antenna Control Unit (ACU) is the operator interface point for the system and features operator-friendly function menus. The 2RU ACU contains all control components including the processor, M&C interface, motor controllers and tracking receiver.

  • Designed for Transportable and Fixed Antennas
  • Steptrack and Pointing Modes
  • Dual Touch-Screen Color
  • Easy-to-Operate
  • GPS, Flux Gate Compass, Inclinometer Interface
  • Configurable to Multiple Antennas

Click here to download a complete data sheet on the Model 830A Antenna Control Systems

Model 930A Antenna Control System
SATCOM Technologies' latest Antenna Control System, the Model 930A, offers economical satellite tracking and control. It is ideally suited for single AC fixed antennas and includes an Antenna Control Unit (ACU), Internal Tracking Receiver (TRU) and a Power Drive Unit (PDU). The Model 930A is the intended replacement for the Company's long-standing Model 7134 Antenna Controller and is backwards compatible with the reliable Model 7150 Power Drive Units.

Click here to download more information on the Model 930A Antenna Control System

Model 950A Antenna Control System with Monopulse Capability
SATCOM Technologies' popular Model 950A Control System (ACS) has recently been upgraded to include optional Monopulse capability. The new control and tracking capability complements SATCOM Technologies' high performance control systems and antenna products.

Monopulse tracking offers continuous measurement of total antenna position performance and improved performance in high wind conditions. Through the use of a phase-angle-of-arrival technique, Monopulse delivers the highest performance tracking method available.

SATCOM Technologies' Model 950A ACS can be used with almost any limited motion antenna for precision satellite tracking applications. The system comprises an Antenna Control Unit (ACU), Tracking Receiver Unit (TRU) and a Power Drive Unit (PDU) which are linked via dedicated Ethernet connections and optional Monopulse scan plate. This provides flexibility in locating the key system components allows for variable separation distances and provides immunity to electrical ground plane transients.

Click here for additional information and to download a full data sheet on the Model 950A Controller.

Electronic Products
Highlighting SATCOM Technologies product display at IBC this year is the ModuMAX Ku-Band, GaN-based Solid State Power Amplifier, the Modular Block Converter, and Wideband Ka-Band Low Noise Amplifier. Also included are the new, light-weight, antenna mount Solid State Block Upconverters.

ModuMAX GaN SSPA Systems - Ku-Band
The Company will showcase its market-leading ModuMAX Gallium Nitride (GaN) Solid State Power Amplifier. A revolutionary concept in solid-state power amplifiers, SATCOM Technologies' ModuMAX and QuadMod series eliminates the need for a spare power amplifier or for redundant switchover networks in many satellite earth station applications. ModuMAX and QuadMod SSPAs using GaN-based amplifiers are completely modular RF amplifier systems offering output power of up to 1.8 kilowatts in Ku-Band. Patented technology utilizes handheld hot-swappable, plug-in RF modules, power supplies, and electronic assemblies to maximize performance and minimize downtime in SATCOM systems. An advanced interface and control system allows remote access and operation.

Click here for additional information and to download a complete data sheet on the ModuMAX GaN SSPA.

Modular Block Converter (MBC)
Available for either C or Ku-Band

General Dynamics' new Modular Block Converter (MBC), offered in C and Ku-Bands, is leading the industry for reliability and ease-of-use. The MBC features quick and easy 'Hot Swappable' modules for all critical components including converters and its power supply.

Click here for more information or to download data sheets for the Ku-Band and C-Band Modular Block Converters.

Wideband Ka-Band Low Noise Amplifiers
SATCOM Technologies' new LKKC20120.0001 wideband Ka-Band Ultra Low Noise Amplifiers are specially designed for satellite earth station and other telecommunications applications. Utilizing state-of-the-art HEMT and GaAs MMIC technology, this 17.7-21.2 GHz amplifier has been designed for both fixed and transportable applications. The noise temperature specification is guaranteed over the full bandwidth of the LNA and measured using a cryogenic hot/cold load test setup.

Click here for additional information and to download a full data sheet on the LKKC20120.0001 Wideband Ka-Band Low Noise Amplifier.

New! Lightweight Solid State Power Amplifier Block Up Converters
SATCOM Technologies' new, lightweight GaN and GaAs-powered series SSPA BUCs are revolutionary in size, weight and power density.

The new SSPA BUCs are ideally suited for mobile applications due to their remarkably small size and low power consumption. In addition, their small size and weight permit direct feed horn mounting which makes them an economical solution for fixed VSAT applications.

Weighing only 6 to 8.5 lbs., the SSPA/BUCs in Ku and C-Band are the most powerful and feature-rich BUCs for their size. Each SSPA/BUC features best-in-class RF characteristics, embedded output isolator and extensive monitor and control capabilities enabled via Ethernet, Serial or Analog interfaces.

There are five data sheets available to provide information on the new series of SSPA/BUCs.

Click here to download information on the Compact C-Band BUC/SSPA 20/40W
Click here to download information on the Compact C-Band GaN/BUC/SSPA 80/100 W
Click here to download information on the High Power Density Ku-Band GaN BUC/SSPA 80/100/125 W
Click here to download information on the Compact Ku-Band BUC/SSPA 16/20/25 W
Click here to download information on the Compact Ku-Band GaN BUC/SSPA 40/50/60 W

Durable and Secure Transit Cases

Composite Rack-Mount Transit Cases
Rounding out the General Dynamics's IBC 2018 display will be samples of the Company's 2400 and 2800 Series Rack-Mount Cases. The versatile and tough transit cases provide exceptional equipment protection with the added utility of slide-mounted 19-inch racks. Slide-out 10-inch racks allow unlimited access to electronic equipment during installation, integration and maintenance.

The 2400 and 2800 Series Rack-Mount Cases are manufactured from General Dynamics' strong GMT (Glass Mat Thermoplastic) composite material. GMT's extreme stiffness, lightweight and high impact-absorbing qualities have made it the composite material of choice for impact-absorbing components in a number of industries. SATCOM Technologies' GMT case shells provide extraordinary impact resistance and rugged durability at temperature ranges exceeding -65°F to +185°F.

Designed to be lightweight and durable, the 2400 and 2800 Series Rack-Mount Cases meet or exceed all MIL-STD-810F performance testing for electronic enclosures to withstand the effects of the harshest environments.

The General Dynamics 2400 and 2800 Series Rack-Mount Cases provide excellent shock and vibration protection for electronic equipment of all types. Maximum sway space inside the enclosure provides the utmost attenuation of impact energy and unequaled shock and vibration protection.

Click here to download a complete data sheet on the General Dynamics Composite, Rack-Mount Transit Cases.

 

 
 


For more information on General Dynamics SATCOM Technologies, contact CustomerCare, at +1 770-689-2040 or via e-mail at customercare@gd-ms.com.

General Dynamics SATCOM Technologies offers a family of satellite and wireless communications products and services. Visit our web site at www.gdmissionsystems.com/satcom.

General Dynamics SATCOM Technologies 4830 River Green Parkway, Duluth, Georgia 30096
 

 
 
This Communicator contains certain forward-looking statements that are based on management's expectations, estimates, projections and assumptions. Words such as "expects," "anticipates," "plans," "believes," "estimates" and variations of these words and similar expressions are intended to identify forward-looking statements. Forward-looking statements are made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995, as amended. Actual future results and trends may differ materially from what is forecast in forward-looking statements.